Otto is an AI. This page says so first.

A synthetic quality engineer here to do your work.

Connected but secure.

“I follow the platform’s workflows and show you exactly what I checked, and a human signs it.”
Otto
Otto, a tin-toy robot character, the avatar of an AI quality engineer

The 60-second pitch

Otto, in his own words.

A minute on what he does and how he works with your team. Sound is off until you press play.

What he actually does

Three things, done carefully.

Read the drawing once. Each document is drafted from it.

The characteristics read from the drawing, with their SC and CC marks, are handed to every draft in the run: Process Flow, PFMEA, Control Plan, and Inspection Plan. A Control Plan records the PFMEA it was built from, the PFMEA records its Process Flow, and every document in a run is tied to the same part revision.

All 18 PPAP elements, checked against each other.

Otto tracks every element of the submission and validates the documents against one another, so the gauge named in the MSA is the gauge named in the control plan, and the revision on the drawing is the revision on the warrant.

A human signs everything.

Otto prepares. He never approves, never signs, and never says a part is approved or a submission accepted. “Prepared by” is the only line he occupies, and he shows his work so the person signing can see exactly what was checked.

18
PPAP elements tracked
10
statistical tools
8
AI document types
8D
complete CAPA workflow

Demo

Watch Otto work.

Three steps, in the order they happen. He enters once, checks across, and hands the pen to a person.

Illustrative walkthrough of the workflow, not a screenshot.

  1. Step 1

    One drawing, three drafts.

    The Process Flow lists the operations and the PFMEA lists the failure modes for each operation. The characteristic, its SC or CC mark, and the specification appear only on the Control Plan row.

    Build / Op 20 stamping

    Process flow

    OpOperation
    10Blanking
    20Stamping
    30Deburring

    PFMEA

    OpFailure mode
    10Width out of tolerance
    20Hole undersize
    30Burr remaining

    Control plan

    OpCharacteristic
    10Coil width, 50.0 ±0.2
    20Hole dia, SC, 10.0 ±0.1
    30Edge condition, no burr

    Links: the PFMEA records the Process Flow it was built from, the Control Plan records the PFMEA, and all three are tied to the same part revision.

  2. Step 2

    All 18 elements, cross-checked.

    For each PPAP element, Otto records what he compared it against. The column is what he checked, and the judgement stays with your team.

    Package / PPAP elements
    #ElementWhat Otto checked
    1Design recordsDrawing revision matches the change record
    2Authorized engineering change documentsChange level carried to the warrant
    3Customer engineering approvalApproval reference present where required
    4Design FMEAFailure modes align with the process FMEA
    5Process flow diagramEvery operation appears in the PFMEA
    6Process FMEASpecial characteristics carried from the flow
    7Control planControls match the PFMEA recommended actions
    8Measurement system analysis studiesGauges named here are the gauges in the control plan
    9Dimensional resultsEach drawing characteristic has a result
    10Material and performance test resultsSpecs referenced match the design record
    11Initial process studiesCharacteristics studied match the control plan
    12Qualified laboratory documentationLab scope covers the tests listed
    13Appearance approval reportIncluded only where appearance applies
    14Sample production partsSample quantity recorded
    15Master sampleRetention location recorded
    16Checking aidsAids listed match the control plan
    17Customer-specific requirementsCustomer requirements cross-referenced
    18Part submission warrantFields complete, left unsigned for a human
  3. Step 3

    A person signs.

    Otto fills in the preparation and stops there. The approval line is left for someone on your team, with his checks right beside it.

    Package / Part submission warrant

    Prepared by

    Otto (AI)

    18 elements compared, checks listed above

    Approved by

    ____________

    a human on your team

Waitlist

Put your name on the list.

Leave an email and we will tell you when Otto is available. No account is created, nothing else is sent, and you can always reach a person at dan@qualityengineer.ai.

Otto is an AI. The platform he works in is live today at qualityengineer.ai.

We use your email only to tell you when Otto is available. See our privacy policy and terms.